Repurposed Baby Bed to Bench

During our recent move, our unused baby bed found a temporary home in my new workshop (not a good thing). Our new home needed an entryway bench, so my wife and I decided a repurposed baby bed to bench was a great project to preserve our children’s baby crib.

Introduction

The bed was one of those overpriced 3-in-1 type beds (crib, toddler, twin) from one of the big box baby stores.  It is noteworthy to mention the bed was purchased before I started building things, which is ashame b/c I could have built this bed for 1/10th of the price we paid for it.

Anyhoo, this repurposed baby bed to bench would be a perfect project for our new house.

 

Tools I used

Check out My Tools page for a complete list of my tools.

 

 

Baby Bed Parts

The baby bed broke down into 6 main parts:  Headboard, right side rail, left side rail, front rail (only used for crib), and 2 runner boards (only used for twin bed).

The headboard (in the front of this pic) was the perfect size for the back of the bench.

I did not have any structured plan going into this project – I just stared at the bed for an unordinary amount of time and the bed sort of transformed into a bench in my mind.

bb2bench-1

 

Entryway Bench Seat

I started by forming the seat with 2x4s & attaching the legs from the front rail.

Next, I cut off the legs from the front rail using my table saw & attached them to the 2x4s using pocket holes with my Kreg K5 and glue.

Then, I removed the hardware on the bed and filled the threaded holes with wood putty.

bb2bench-2

 

Attaching the Seat

I missed a few pictures leading to the picture below (thank you icloud photo migration).  I’ll explain the steps I took in the following paragraphs.

I attached the bench frame to the bed headboard using pocket holes.  The top of the bench is 19 1/4″ from the ground in order to make sure the top of the bench seat is 20″.

Next, I secured 4-1×6 pine boards to the top of the seat, but ripped each board down with my table saw from 5 1/2″ to 4 3/4″.  This made the bench 19″ from back to front.

Then, I used brad nails and wood glue to attach the boards to the brace.  The dimensions of the bench seat ended up being 56″x19″x20″ (LxWxH).

bb2bench-5

 

Skirt and Arm Rest

I took the front rail/panel piece of the bed (this is the piece that would be used for the front of the crip) and ran it through my table saw about 8 inches from the top.  This left me with an 10″ piece and a 15″ piece with both being 50″ wide.

Next, I used the 15″ piece for the bottom skirt of the bench.  The 10″ pieces were cut down to 20″ for each arm rest.

Then, I attached the arm rests using brad nails and wood glue.

I attached the bottom skirt with pocket holes to the front legs and brad nails at the top on the spindles.

Finally, I used the original bed rail boards as a bottom brace from the head board to the back of the front legs at the bottom.

bb2bench-4

 

Baby Bed Local Charm

The bed already had nice trim work, but I added a few trim pieces around the front/side bench seat.

My wife and I were both born in New Orleans and live close to the city presently.

So, I added the 2 fleur de lis blocks I bought from a big box store on each side of the bench skirt to add a bit of local charm.

bb2bench-3

 

 

 

Apply Primer

I was satisfied with the results once the repurposed baby bed to bench was assembled.

Next, I primed the bench with this Zinsser primer.  The baby bed had a very glossy finish and it was important that I applied a solid coat of primer to ensure the paint had something to stick to.

I applied 2 coats of primer with my Graco Truecoat Plus II.

mudroombench-27

bb2bench-9

 

Painting

After applying the primer, I started painting the following day.

I used Sherwin Williams Essential Gray (SW6002) in a satin finish.

Setup Paint Station

The paint station in my workshop was setup by hanging a white painter’s cloth on the garage door runners on the sides of the bench.

Next, I used another painter’s cloth behind the bench on the garage door itself.

Then, I used my paint sprayer to apply 2 coats of paint spaced about 6 hours apart.

bb2bench-10

 

American Girl Doll Bed

My daughter is a frequent visitor (& helper) in my shop when I’m working on projects.

As she was helping me pick up the scraps from this project, I thought of a way to put these scraps to good use.

Santa brought my daughter an American Girl Doll about a month earlier for Christmas.

Since Tiffany (the name my daughter gave to her American Girl Doll) needs more accessories than most humans, an American Girl Doll bed is an absolute necessity!

So, I cut a few pieces of scraps I needed to make the headboard/footboard of the bed.

I had a few pieces of 2x4s laying around, so I used those to make the side rails.

The bottom of the bed was made with scrap 1x4s.  I attached everything with pocket holes and glue.

bb2bench-6

 

Next, I cut some of the thin middle pieces from a leftover side rail of the baby bed and used them to cover the 1x4s at the bottom.

bb2bench-7bb2bench-8

 

Homemade Chalk Paint

I took this opportunity to use my homemade chalk paint, which was 1/3 white latex paint, 1/3 calcium carbonate, and 1/3 plasters of paris.

The mixture turned out well and went on very easily – I only needed 1 coat.

Next, I sanded it down a tiny bit with 220 grit sandpaper for a distressed look.

Then, I applied clear finish wax after the paint dried.

bb2bench-15

 

Final Products

Here is a picture of both completed pieces.

bb2bench-13

 

Stacey bought bench and back pillows for our repurposed baby bed and it really turned out well.

The bottom pillows were purchased from Lowes and the back pillows from Kirklands.

bb2bench-17

 

The repurposed baby bed to bench turned out really nice.  We are very happy with our new entryway bench.

Thank you very much for taking the time to read about this project – I truly do appreciate it!  Check out my dresser to mudroom bench project here.

SaveSaveSaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

Join My Newsletter

I'll send project updates and FREE stuff

We won't send you spam. Unsubscribe at any time. Powered by ConvertKit

2018-04-21T08:43:49+00:00 0 Comments

Leave A Comment